Energie Management ISO 50001
ISO 50001 recertification for the following activity:
Production of self-drilling screws for wood and metal applications, partially and fully threaded screws for lead-bearing timber construction and special screws for installation and adjusting of parts for construction.
ISO 50001
DIN EN ISO certifications
SWG Schraubenwerk Gaisbach GmbH has been certified by DQS GmbH (German society for the certification of management systems, Ltd.) in accordance with the standard DIN EN ISO 9001 : 2015 for its quality management and in accordance with the standard DIN EN ISO 50001 : 2011 for its energy management system.
CE marking for wood construction screws
In each of the issues 5.2013 and 6.2013 of the magazine "Bauen mit Holz" ("building with wood") there is an article "Holzschrauben auf europäisch" ("wood construction screws at European standard") contrasting two procedures which allow the CE marking for wood construction screws. There are basically two ways for the marking of wood construction screws. On the one side by a European Technical Assessment (ETA), and on the other side by a declaration of conformity by the manufacturer on the basis of the standard EN 14592:2008+A1:2012 (system 3). However, both possibilities are highly diverse. The declatation of conformity by the manufacturer merely requires an initial inspection by a notified body and subsequent production controls at the factory. In contrast, for the CE marking by means of product certification, i.e. ETA, various inspections and monitoring procedures have to be met, after an initial inspection in the factory by the notified body. The extensive inspection plan which is part of the technical documentation of the European Technical Approval (ETA) has to be complied with, just like the regular approval of the factory production controls by the notified body. The expenditures of thme and money for the company are significantly higher with a CE marking by product certification then with a CE marking by conformity declaration. The end customer therefore has the certainty of working with a consistend high-quality product which complies with the corresponding structural claims and requirements.
Due to the product certification, SWG Production is in a position to apply a CE marking on many products. Thus, our customers can rely on consistent high products standards.
ETA-12/0197 of 2019/02/28 (EN)
Declaration of Performance / DoP for TIMTEC screws - DoP 12-0197_01
Approvals in North America
Already in 2013 the Canadian Construction Materials Centre (CCMC) gave approval for Plus fully threaded screws and for multi-purpose timber construction screws. Consequently these screws are approved under the certification number CCMC 13677-R in Canada as a means of fastener in wood constructions.
Since October 2014 these types of screws also have an approval as fastener in wooden buildings in the USA. The ICC Evaluation Service gave approval under the numbers ESR-3178 and ESR-3179.
